|
|
Apartment Building Gemini
Povýšil, Marek ; Pilinszki, Martin (referee) ; Brzoň, Roman (advisor)
The subject of the bachelor’s thesis is elaboration of the project documentation of an apartment building in Brno – Medlánky. The building is designed as free-standing in a sloping terrain and has 4 floors above and 1 underground. There are a total of 18 dwelling units. The structure in underground floor is designed as combination of reinforced conrete walls and columns, the structure of floors above is designed as masonry sytem of walls from brick blocks. The ceiling structures are designed as reinforced concrete slabs. The roof structure is in a form of warm flat green roof. The foundation structures are designed as reinforced concrete strips and pads.
|
|
|
Apartment building in Zlín
Franko, Michal ; Příborský, Roman (referee) ; Bantová, Sylva (advisor)
The content of this bachelor thesis is a design of a newly-built apartment house in the town of Zlín. It is an object with four above-grounf floors and a basement. An object is partially basement. There are 16 dwelling units situated in the four floors above the ground and a pram room, a bycicle storage room and a cellar cubicle for each of the 16 apartments. The building is based on a reinforced concrete foundation strips. Vertical load-bearing constructions are designed from ceramic blocks. Horizontal load-bearing constructions are made from cast-in-place reinforced concrete. The object will be protected by a warm flat roof. This thesis contains the project documentation for the construction work which was made in accordance with the valid legal and technical regulations.
|
|
|
New apartment building
Křičenský, Adam ; Svoboda, David (referee) ; Čuprová, Danuše (advisor)
The subject of the bachelor’s thesis is the processing of the design documentation for execution of an apartment building. Designed building is located in Hrochův Týnec. The access to the building is from the south. The plot is flat and it disposes with parking places for nineteen cars. It is a building with three above-ground floors and partial basement that is designed with a total 8 dwelling units. The structural system of the designed building is wall system. All vertical structures are made of clay brick. The exception are external walls in the basement, that is designed of concrete blocks (permanent formwork). The horizontal structures are designed of prefabricated rib-and-filler floor that is made of ceramic concrete ceiling beams, ceramic inserts and overconcrete. The conection structure of the building is the cast-in-place reinforced concrete staircase. The roof is designed as a green flat roof in combination with the walkeble flat roof. The roof above the stairwell is designed as a non-walkeble flat roof. The thermal insulation of the whole object is made of the ETICS certified contact thermal insulation system. The apperance of the building is completed by facade colours that are selected in shades of white, light gray and dark gray.
|
|
|
Multifunctional house
Blaha, Ondřej ; Janík, Zdeněk (referee) ; Kalousek, Miloš (advisor)
This final thesis deals with a project documentation of a new multifunctional building. The building is located in Žďár nad Sázavou, in the Neumannova street. The building is divided into residential units and areas for a small company and a shop. The house is projected as a detached building with a partial basement and three floors. The residential part has 8 apartments in total – four apartments with three bedrooms, one with two bedrooms and three with one bedroom. It includes also cellars belonging to the apartments. The non-residential part includes space for a shop and an administrative part consisting of a reception, a meeting room, offices, stores and sanitary facilities. The main entrance in to the residential part is located on the level of staircase half landing. Main entrances into the non-residential parts are on the level of the ground floor. The house dispose with 24 parking places, two of them are dedicated for drivers with disabled parking permit. The building is based on concrete strip foundations. The external load-bearing structures are walled with clay masonry in the floors and with permanent formwork in the basement. The ceiling structure is formed with prestressed floor slabs. The house is covered with a warm flat roof. The staircase is pre-fabricated. In the thesis, there was put a stress on the appropriate dispositional, structural, technical and architectural design and on the safety in the use of the building. The drawing documentation is processed in the AutoCAD.
|
|
|
Apartment house Vinařská
Irra, Matěj ; Woytela, Jindřich (referee) ; Brzoň, Roman (advisor)
The subject of this bachelor thesis is the design of apartmnet house in Brno, in Vinařská street. The building is placed on sloping terrain, has three floors and one basement. Apartment building has rectangular shape with north-facing entarance and loggies at south facade. The house is designed as eight dwelling units and cellar. External walls are made as clay masonry with thermal insulation and area around windows is designed as ventilated facade. Ceiling structures are reinforced concrete slabs. The supporting construction of roof is made of roof truss with collar beam and then there is metal roofing.
|
|
|
Industrial Park with Aministration Building
Krupa, Jakub ; Dohnal, Jakub (referee) ; Pěnčík, Jan (advisor)
This master thesis focuses on the design and elaboration of project documentation for the purpose of constructing Industrial park with administration building consisting of two parts, SO 01 – Administration building and SO 02 – Industrial building. The two objects are situated on the plot No. 715/1, in the cadastre unit Vrbno pod Pradědem located on an undeveloped land of the investor. The exit from the parking lot connects to the local traffic infrastructure. Public infrastructure leads in proximity to the land. The design of the construction respects local zoning plan. Project documentation was made in compliance with up-to-date requirements according to valid standards and regulations. The building is functionally divided into two objects, SO 01 and SO 02, which are operationally and structurally connected. Constructions of both objects are statically independent. The object SO 01, partially accessible to the public, is used for administrative tasks and staff facilities. Also, there is a sample room available to the public, gatehouse and warehouses. The object SO 02 is purposed for the production of plastic windows and solar panels. It mainly consists of areas used for production, but there is also an office for the master, a machine room for heating, ventilating and air conditioning (HVAC) and staff facilities. The object SO 01 is designed from a wall structural system from clay masonry, clay ceilings, strip foundation and a flat roof. The object SO 02 is designed as a full-metal prefabricated object with a saddle roof and foundation pads. The construction system of this object consists of steel columns. Plan dimensions of SO 01 are 25x14 metres. Building envelope is made from clay blocks, 440 mm in width, filled with mineral wool. Plan dimensions of SO 02 are 66,9x22,9 metres. Object’s curtain walling is made from prefabricated sandwich panels containing a core from PUR material.
|
|
|
New apartment building in Příbor
Murgašová, Dominika ; Vacenovská, Veronika (referee) ; Petříček, Tomáš (advisor)
This bachelor thesis deals with designing an apartment building in Příbor. It is a detached building with partial basement and three above-ground floors including nine dwellings units. On each floor there are three dwelling units. Masonry is designed partly with permanent formwork and ceramics blocks. Ceiling system is based on rein forced concrete. Roof construction is a single-skin flat profile roof. The thesis includes project documentation for counstruction work.
|
|
|
Apartment building
Staněk, Matěj ; Kozubíková, Ivana (referee) ; Matějka, Libor (advisor)
The subject of the bachelor's thesis is the elaboration of project documentation for the construction of an apartment building in Hradec Králové on U parku street. It is a building with four above-ground and one underground floor. The vertical load-bearing structures are made of Porotherm clay blocks, the horizontal load-bearing structures are made of MIAKO clay floor blocks, placed on ceramic-concrete ceiling joist and filled with concrete. In the basement there are garages for six cars and storage space. There are eleven residential units on the upper floors. The roof is designed as warm flat roof with growing layer.
|
|
|
Apartment building in Lanškroun
Rousková, Radka ; Bečkovská, Tereza (referee) ; Brzoň, Roman (advisor)
This bachelor thesis concerns the design documentation for the construction of an apartment building in Lanškroun. The aim of the thesis is work out a layout of the building and design a suitable construction system. Design documentation complies with valid standards and regulations. The program AutoCAD was used for processing. The proposed building has three storeys and a partial basement. The apartment building has 8 flats and one of them is designed for a barrier-free. The vertical refit works above ground are designed as clay masonry, masonry consists of permanent formwork in the basement. Horizontal ceiling structures are designed as a monolithic reinforced concrete slab. The apartment building is covered warm flat roof. The building is based on foundation strips.
|
|
|
Brewery
Dědičová, Helena ; Bartolšic, Vít (referee) ; Matějka, Libor (advisor)
This thesis deals with the design of brewery in Litomyšl. Brewery with beer production 2000hl per year and restaurant for 140 guests and kitchen have the main function of the building. The building is designed as one construction object and its built-up area is 472,2 square meters. The building has a partial basement, two floors and it has structural masonry system. A load-bearing walls of two floors are formed by clay masonry and the load-bearing walls of the basement are formed by permanent formwork. A roof of the building is a flat roof with a slope of 3 percent and the finish is made of modifed bitumen membrane.
|
guest ::
